开思茂薄膜材料科技(东莞)有限公司

Cosmotec Thin Film Material Technology Co. LTD.
13910808921
cosmotec@cosmotec.net.cn

光学PET保护膜 Optical PET protective film

[双层]光学PET亚克力保护膜

Optical PET acrylic protective film 


*************************************************************************************************************************************************

光学PET保护膜主要应用于玻璃盖板制成和出货保护膜,分为硅胶系列和亚克力胶系列,种类双层、单层、膜抗静电、胶抗静电、双抗静电、各种粘度等系列.

Optical PET protective film is mainly used in glass cover made and shipped protective film, divided into silicone series and acrylic series, type of double layer, single layer, film antistatic, antistatic, double antistatic, various viscosity series


构成Composition

PET基材 PET base      抗静电处理(可选) Antistatic coating(Yes/No)

粘着层adhesive layer  抗静电处理(可选) Antistatic coating(Yes/No)

PET离型膜 PET release liner   


特征 Features           

此款为透明PET基材保护膜 ,适用于面板保护,如不锈钢,铝板,铭板业。复合材料,非常适合电子制造加工业使用。无需引物处理,即可对粘合物发挥优良的粘接性。该系列是用特殊粘合剂,具有优良的初期粘着力。

This is a transparent PET substrate protective film, suitable for panel protection, such as stainless steel, aluminum plate, Ming plate industry. Composite materials, very suitable for the use of electronic manufacturing and processing industry. Without primer treatment, the adhesive can play a good adhesion. This series is a special adhesive with excellent initial adhesion.

 

性能 Performance

项目

单位

公差

目标值

测试标准

外观

无色透明、无杂质、无划痕

目视



基材厚度

UM

±5

38~100

GB7125-1999

胶厚度

UM

±5

10

GB7125-1999

离型膜厚度

um

±2.5

25~75

GB7125-1999

180度剥离强度

g/in

 ±5

20

GB/T2792-1998

初粘力

号球

≥2

1~1000

GB4852-8

胶面阻抗

Ω

3×1010~3×1011

3×1011

GB11210-1989

膜面阻抗

Ω

3×105~3×107

3×106

GB11210-1989

工作温度

0~100



 

应用技术 Application technology

   要将粘贴物表面的油,水分,灰尘等杂物清除干净。由于使用了感压性黏着物,因此压贴时需要使用滚筒或冲压设备给予充分压贴。由于胶带本身的黏着力需要一定的时间才能充分发挥出来,因此在粘贴后至少数小时内,请注意不要使胶带承受较大的压力。使用时,请注意其初期粘合力及时效变化,作充分的事前确认。

To paste the surface of the oil, water, dust and other debris cleared. Due to the use of pressure adhesive, so the need to use rollers or stamping equipment to give full pressure paste. Since the adhesive force of the tape itself needs a certain time to give full play to, please pay attention not to make the tape bear great pressure within a few hours after pasting. When using, please pay attention to the initial adhesion force and aging changes for full prior confirmation.

 

储存环境 Storage environment

   请务必将其保存於原包装或原箱内进行保管。请选择没有阳光直射的阴暗场所进行保管。产品若为妥善保存(恒温恒湿),产品有效期从客户收到之日起6个月。5~30℃、避免在日光直射、低温(0℃以下)、高温(40℃以上)、高湿(70%RH以上)环境下放置。

Please be sure to keep it in the original packaging or original box for safekeeping. Please choose a dark place without direct sunlight for storage. If the product is properly stored (constant temperature and humidity), the product shall be valid for 6 months from the date of receipt by the customer. 5 ~ 30 ℃, avoid direct sunlight and low temperature (below 0 ℃), high temperature (over 40 ℃), high humidity (70% RH) environment.

  

光学PET亚克力保护膜.jpg

------------------------------------------------------------------------------------------------------------



[单层]光学PET保护膜

Single layer optical PET protective film


*************************************************************************************************************************************************


光学PET保护膜主要应用于玻璃盖板制成和出货保护膜,分为硅胶系列和亚克力胶系列,种类双层、单层、膜抗静电、胶抗静电、双抗静电、各种粘度等系列.

Optical PET protective film is mainly used in glass cover made and shipped protective film, divided into silicone series and acrylic series, type of double layer, single layer, film antistatic, antistatic, double antistatic, various viscosity series

 

构成Composition

PET基材 PET base  

粘着层adhesive layer  

                               

特征 Features           

    此款为透明PET基材保护膜 ,适用于面板保护,如不锈钢,铝板,铭板业。复合材料,非常适合电子制造加工业使用。无需引物处理,即可对粘合物发挥优良的粘接性。该系列是用特殊粘合剂,具有优良的初期粘着力。

This is a transparent PET substrate protective film, suitable for panel protection, such as stainless steel, aluminum plate, Ming plate industry. Composite materials, very suitable for the use of electronic manufacturing and processing industry. Without primer treatment, the adhesive can play a good adhesion. This series is a special adhesive with excellent initial adhesion.

 

性能 Performance

项目

单位

公差

目标值

测试标准

外观

无色透明、无杂质、无划痕

目视



基材厚度

UM

±5

38~100

GB7125-1999

胶厚度

UM

±5

10

GB7125-1999

180度剥离强度

g/in

 ±5

20

GB/T2792-1998

初粘力

号球

≥2

1~1000

GB4852-8

工作温度

0~100



 

应用技术 Application technology

   要将粘贴物表面的油,水分,灰尘等杂物清除干净。由于使用了感压性黏着物,因此压贴时需要使用滚筒或冲压设备给予充分压贴。由于胶带本身的黏着力需要一定的时间才能充分发挥出来,因此在粘贴后至少数小时内,请注意不要使胶带承受较大的压力。使用时,请注意其初期粘合力及时效变化,作充分的事前确认。

To paste the surface of the oil, water, dust and other debris cleared. Due to the use of pressure adhesive, so the need to use rollers or stamping equipment to give full pressure paste. Since the adhesive force of the tape itself needs a certain time to give full play to, please pay attention not to make the tape bear great pressure within a few hours after pasting. When using, please pay attention to the initial adhesion force and aging changes for full prior confirmation.

 

储存环境 Storage environment

   请务必将其保存於原包装或原箱内进行保管。请选择没有阳光直射的阴暗场所进行保管。产品若为妥善保存(恒温恒湿),产品有效期从客户收到之日起6个月。5~30℃、避免在日光直射、低温(0℃以下)、高温(40℃以上)、高湿(70%RH以上)环境下放置。

Please be sure to keep it in the original packaging or original box for safekeeping. Please choose a dark place without direct sunlight for storage. If the product is properly stored (constant temperature and humidity), the product shall be valid for 6 months from the date of receipt by the customer. 5 ~ 30 ℃, avoid direct sunlight and low temperature (below 0 ℃), high temperature (over 40 ℃), high humidity (70% RH) environment.      


微信公众号
置顶